Agilent English 2013-12-01 PDF 150 KB 54932-92003 c20131113 [4] free download

File name English _ 2013-12-01 _ PDF 150 KB 54932-92003 c20131113 [4].pdf

Safety Information The following general safety precautions must be observed during all phases of operation of this instrument. Failure to comply with these precautions or with specific warnings or operating instructions in the product manuals violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer's failure to comply with these requirements. Product manuals are provided with your instrument on CD- ROM and/or in printed form. Printed manuals are an option for many products. Manuals may also be available on the Web. Go to www.agilent.com and type in your product number in the Search field at the top of the page. General Do not use this product in any manner not specified by the manufacturer. The protective features of this product may be impaired if it is used in a manner not specified in the operation instructions. Before Applying Verify that all safety precautions are taken. Make all connections to the Power unit before applying power. Note the instrument's external markings described in "Safety Symbols". Ground the If your product is provided with a grounding type power plug, the Instrument instrument chassis and cover must be connected to an electrical ground to minimize shock hazard. The ground pin must be firmly connected to an electrical ground (safety ground) terminal at the power outlet. Any interruption of the protective (grounding) conductor or disconnection of the protective earth terminal will cause a potential shock hazard that could result in personal injury. Part number 54932-92003, December 2013 *54932-92003* s1 Fuses See the user's guide or operator's manual for information about line- fuse replacement. Some instruments contain an internal fuse, which is not user accessible. Do Not Operate in Do not operate the instrument in the presence of flammable gases or an Explosive fumes. Atmosphere Do Not Remove Only qualified, service- trained personnel who are aware of the hazards the Instrument involved should remove instrument covers. Always disconnect the power Cover cable and any external circuits before removing the instrument cover. Cleaning Clean the outside of the instrument with a soft, lint- free, slightly dampened cloth. Do not use detergent or chemical solvents. Do Not Modify Do not install substitute p